Quote:
Originally Posted by Clan
Well that is a clue .. so you bridged the Green/yellow * (A18) input wire from the CEM to the two Yellow output wires (B3) with the pedal pressed and nothing happens , no voltage ?
There is a direct link through in the REM for these terminals , switching is done in the CEM .
(* = the input signal to the REM from the CEM is a Green wire with a yellow stripe ) .
|
The yellow wire coming from the cem and the yellow wire from the rem is the ones I've bridged. Never touched a green wire? So if it is a direct link you think just leave the bridge in place?