View Single Post
Old May 4th, 2021, 13:22   #8
Clan
Experienced Member
 
Clan's Avatar
 

Last Online: Yesterday 22:26
Join Date: Jun 2007
Location: L/H side
Default

Quote:
Originally Posted by Tony500 View Post
The yellow signal wire going into the rem is getting a feed but the yellow signal wire coming out has nothing. No fault on the dash when I've bridged the two wires with a 5amp fuse.
I've not had a chance to get visa on it yet but will later this week but my autel points to a short on the circuit so I presume the internal relay is shot?
Well that is a clue .. so you bridged the Green/yellow * (A18) input wire from the CEM to the two Yellow output wires (B3) with the pedal pressed and nothing happens , no voltage ?

There is a direct link through in the REM for these terminals , switching is done in the CEM .

(* = the input signal to the REM from the CEM is a Green wire with a yellow stripe ) .
__________________
My comments are only based on my opinions and vast experience .
Clan is offline   Reply With Quote
The Following User Says Thank You to Clan For This Useful Post: