Tis a bit of a b**l-ache.
Have replaced the shark fin seal which involves removing the antennae to pass the cable through, so its much the same task.
Need to cut the seal (make sure you have a replacement to hand ) with fishing line - take care not to damage your paint.
Then need to get to the base of the antenna to disconnect cables.
Remove the three pieces of trim round the rear tailgate opening an also the trim pieces round the rear quarter windows
Probably have to release the large pieces below the windows as wel thought not remove.
Take out the trim pieces the coat hooks above the rear doors and the sockets for the load guard -
Get access into the interior light - that also holds the roof lining
That releases enough of the roof lining to get hand up from the tailgate to the antenna to unclip 2 coax cables .
The antenna will then come away .
Then put it all back with new antenna and new seal .........
or buy a Tom Tom
