Thread: S40 (New) Electrics : - Guide: Replacing the boot wiring harness
View Single Post
Old May 16th, 2015, 15:00   #16
benrpatterson
Junior Member
 

Last Online: Apr 20th, 2022 20:58
Join Date: Mar 2015
Location: Cardiff
Default

Quote:
Originally Posted by homer timpson View Post
Updating on this thread to thank user for posting this guide

I followed the instructions for my 2004 S40 - a wire inside the plastic boot had snapped and was easily repaired and has worked fine for 2 years.

My wife's 2010 S40 had the 'boot open light' warning and I traced it to the exact same area - she had a couple of badly frayed wires in the same plastic harness. However, I really had to 'pull down' on the plastic boot to expose the wires and effect a repair. I was frightened that if I'd pulled any firmer I may have snapped the whole loom, so I ended up cutting open the plastic boot entirely to access the wires.

I've carried out the repair and the boot opens and closes fine now - but now I will need a new loom and plastic boot.

My query is this: On the attached photo the loom goes into the main body of the car - where does it go from there?

I can see from the guide where the wires appear to be connected to on the boot side - but where do they go internally?

Homer
Left side of the boot mate at the top under the parcel shelf
benrpatterson is offline   Reply With Quote
The Following User Says Thank You to benrpatterson For This Useful Post: