Quote:
Originally Posted by JoolzP
I have had the same problem but only since replacing both cables. Now one side works fine but drivers side doesn’t work at all. Have replaced discs, shoes, cables and pads. It feels like the cable on non-working side is too long/ longer than working side. I’ve had it all apart again today and greased the actuator. Cable seemed “stiff” but not ceased.
|
Make sure that the arms on the caliper are returning to the full "off" position when the handbrake is in "off" position. If the arms are not fully returned to the "off" position the caliper will not adjust itself properly.