one more S60 fault
the light on ours are constantly generating that "Position light" fault message.
Have found 3 causes,
1 yes light is truly burnt out....easy
2 the light is not burnt out and works when reseated, I suspect a poor contact between bulb and frame
3 the light appears not burnt out but does not work when reseated...check with a DVM for continuity as the filament may be making contact, or 'tap' the bulb while looking through it and you will see the loose filament.
If it is not this issue check the ground for each light circuit, (DVM again) as the message is not specific enough...
__________________
2001 S60 auto, non Turbo, 284,000 Km
|