Not necessarily running but ignition has to be on:~
Access to the switch is fraught with difficulties with the engine in- switch isn't accessible as it is in the top of the box- it can be lowered from the rear but this again gives very limited access to the cable connections.
From memory the cables have push in connections above the box and this is a likely point that brakes the circuit if disturbed. It is important to make sure the the cables are held in place by the cable holder and routed properly around the gear lineage.
I would look at the connections first and then move on if required?
switches are usually good.
Blue air- bruised hands-kids asking Mum what are words that Dad is saying day!
Good Luck
Bob.
|