Hi,
Sorry for the delay, finally got back to looking at my Volvo, I don't actually have a VIDA, so just did a bit more digging.
I checked the voltages to the Gear Selector Module:
- Once the ignition was turned on, the 12v powering the solenoid turns on and engages the solenoid.
- When I press the brake on and off a 12v signal switches on and off at the the board, but it does not switch off the solenoid, power stays on.
I opened up the Gear Selector Module unit and found that there was brown stuff all over the circuit board (I've attached a photo). I've tried cleaning, but it made no difference.
Therefore my obvious conclusion is that it must be this board, It will cost me about $300 for a new one here in Australia...... jus thought would double check with you guys I am not missing anything obvious?
Cheers,
|