View Single Post
Old Apr 5th, 2021, 20:56   #2
Bob Meadows
Premier Member
 

Last Online: Today 18:19
Join Date: Sep 2017
Location: STANDISH LANCASHIRE
Default

Worth checking the one way valve that is in the rear screen pillar- drivers side, remove the inner trim panel and look above the rear light. These can become blocked- whilst there you can test the pump by removing the water tube that runs from the same along the floor (under metal trim & carpet) place the end in a jar/tin and if water is being pumped out the valve & tailgate fitting will need cleaning- new valves are available from the likes of ebay.

Pump & Valve are the easier check first and once working flush the system through as it is quite common for old screen wash to form a scum etc.

You should find two pumps under the washer bottle for the rear & front-worth doing the front whist in there (you will also find another valve for the headlamp washers if fitted just behind the grill)
Hope it helps.
Bob.
Bob Meadows is offline   Reply With Quote