Hello,
I think your radio may be the same connection as my CR-702, as they share the same amp.
If this is the 14 pin connector that plugs into the back of the amp, page one of the attached might be useful. Note - all plugs in the diagram are viewed from the front, i.e. with wires coming out of the back.
The later diagrams were to convert to an ISO plug to install Sony/JVC etc without cutting any wires.
I think your queried pins (using your numbers) are speaker connections:
#6 LR-
#7 LR+
#9 LF-
#12 RF+
Regards
Lucien
|