Quote:
Originally Posted by owenfackrell
On the fitting Nick, as i have just done mine, i found it usefull to also unbolt the second exhuast mount that is on the rear subframe/axel as it gave me more room to get at the bolts that side as it a bit tight on room.
|
Thanks - I had a quick look and dropped the exhaust from the rear hanger and also the second mount ( just unbolted this one on both sides. I hoped this would lets the exhaust drop down enough.
I also assumed I would need to remove the lower part of the bumper (the silver trim ) as advised by someone else on here - or atleast partially remove it from the support piece to the right of the exhaust where there are two push fit fixings.
Did you have to do this or could you somehow position the towbar into the space without having to do any of this ?
And were you fitting the same towbar ?
If so - how big a cut did you have to make ? - I'm planning on making as small a cut around the towbar as neccessary.
Thanks