Rear axle press studs
The rear axle in the 940 is held on with metal hoops that go over the axle and bolt onto the aluminium trailing arms. The hoops have pressed in studs that tend to snap off because they get pretty corroded next to the aluminium.
I'm trying to source these, but the closest I can find is trailer wheel studs but the splines are too large.
Original part
M10x35mm 1.5mm pitch, approx ~11.3mm spline dia, spline length ~4mm.
Trailer wheel studs:
M10x40mm 1.25 pitch, 12mm spline dia, 10mm pline length.
Anyone know where to get them? google not coming up with anything helpful.
|