V50d anti skid
Hi all
We've had our v50 2.0d for a few years with few probs until now
Main issue "anti-skid service required"
When this comes up all lights, indicators, instruments fail but the engine runs at idle speed only, leave it a minute, restart and all is well for a few miles until it happens again.
Reading into this common prob I'm looking at replacing the SWM/clock spring, now, can I fit a known good used part? Will it require a software upgrade or are they plug and play? Any advice appreciated.
Codes thrown
Abs 0115 comms to SWM missing
Eps0080 steering wheel angle sensor faulty
Eps0071 power supply signal low
Cheers
|