View Single Post
Old Sep 14th, 2021, 05:01   #5
Antoswolo
New Member
 

Last Online: Sep 14th, 2021 05:01
Join Date: Sep 2021
Location: Edmonton, AB
Default

Quote:
Originally Posted by DLM48 View Post
Used my loan Tablet {my Linix12x64 that is dedicated to VIDA would not start up or charge its battery}with W10 and VIDA plus the DICE and we have lots of faults

Cleared them and we still have two BIG SURPRISE NOT

CEM-DE6E Communication with TCM control module Signal missing

CRM-20B1 Hall sensor 3. Shorted to supply

Dont know about the CRM fault but it can wait for another day

VIDA says 372: CRM-DE6E Communication with TCM control module Signal missing

CHECK THE FOLLOWING

The fuse in the engine compartment fusebox for the transmission control module TCM

WOOOOO HOOO FUSE #23 10A BLOWN !!!!!

Car now starts I will check the hood operation tomorrow MAYBE or just leave that one for a time when I have more time and better weather to investigate that problem

SO IF you have no gear indication on the dash and the gear consul does not light up showing the gear positions.......and your car wont activate the starter CHECK FUSE #23
I also had my Transmission Control Module (TCM) 10A fuse blow located in the CEM under the passenger glove box. So be sure to check not only the engine fuse box, but under the glovebox as well. ESPECIALLY on V50's (prone to sunroof drain problems).
Antoswolo is offline   Reply With Quote