The holes are in the same distance, so they can be replaced, the old ones aren't fix to one type of upholstery but are used until a chassisnumber. But you also have to get the longer bolts with the older type handles for the bolts from the late type handles are too short for the early ones. Left and right of the older type handles are different, the newer ones can be used left and right. If the stainless steel trim isn't your aim you can take some from a PV544 or a similar Volvo (not the early ones, they have other handles), they are the same and easy to get but lacking this trim. There are two different types of this trim: left and right different for the upper side is broader / the lower side is narrower, and left and right the same for upper and lower side both narrow (upper side doesn't reach to the vinyl then). There are different patterns of the vinyl, so it could be that a pair isn't really a pair, but the vinyl often has to be replaced so at last after that they have the same vinyl. And to make the information complete: Volvo used different plastic for the lower part: one plastic with black colour that gets translucent after being long in daylight and another plastic that stays black.
|