Quote:
Originally Posted by Clan
It needs the brake light input signal for the REM checking on the network with VIDA
Vida will also send that signal manually so checking the REM itself , have you measured the outer brake light feeds from the REM ?
It just needs some simple diagnostics ..
|
The yellow signal wire going into the rem is getting a feed but the yellow signal wire coming out has nothing. No fault on the dash when I've bridged the two wires with a 5amp fuse.
I've not had a chance to get visa on it yet but will later this week but my autel points to a short on the circuit so I presume the internal relay is shot?