View Single Post
Old Aug 5th, 2022, 18:24   #4
ilmiont
VOC Member
 

Last Online: Today 15:27
Join Date: May 2020
Location: Oxfordshire
Default

I jack under the front subframe with a block of wood in between. By chance I got a piece of wood that's the exact width of the subframe. I've become comfortable with this approach now.

Axle stands go under the "triangle pieces"; I try to align mine so the big subframe bolt sits nicely in the axle stand.

I think that with a large jack saddle you could jack under the subframe cross member without the wood but it doesn't seem many people do. There's a circular depression in the middle and it is mentioned, in vague language, in the handbook. My car's got a few surface scrapes around that depression so I think it's been jacked directly from it in the past.

You can definitely jack from the side mounts (scissor jack points) with a trolley jack too. I've done this several times now. Be wary that the front jacking point will lift the rear wheel as well - the whole side lifts because they're so close together.
__________________
2005 S60 2.5T SE (Manual, Magic Blue)
>170k miles.
ilmiont is online now   Reply With Quote
The Following User Says Thank You to ilmiont For This Useful Post: