ffs,,,,,,
Can't anyone give the fella a straight answer to the original question????
There are several ways to skin a cat if you want 300bhp from a B230FK....There are 'cheap ' ways of doing it or there are proper ways....
The first thing that needs doing is the clutch, most people uprate to a TTV Flywheel and Sachs 850R clutch which will just about hold on to 300bhp....
Engine wise, you need to start with the obvious breathing mods like an exhaust, you can get 2.5 and 3 inch systems off the shelf but probably cheaper getting a custom system fabricated as i did. If you want 300bhp a 3 inch is recommended...
Then a bigger turbo (19t for 300bhp)which will need a bigger downpipe) bigger injectors, a lot of people seem to use the VXR injectors, a bigger intercooler (KL RACING) and preferably a cam which again you can use a Volvo n/a cam or buy a proper one one from KL or IPD. you will need an uprated FPR (Porsche 944 turbo)
Then of course there is the electronics....you can either get some generic chips from ebay or it is much better to get a custom map done when you have done all the mods,,,to do this you will need a gold EZK box or a kit from classicswede to convert your ezk to chippable....250bhp is a lot cheaper to achieve,,,,
i may have forgotten some stuff bot hope this helps....Damo
|