The codes on the print out were downloaded by a friend who runs a big repair garage. Prior to that I had borrowed a Snap On code reader which gave me 5 engine related faults. I photographed the 5, cleared them and after a short drive 3 of them came back. The car has no power as if the turbo has failed. It will get up to 70 mph but takes forever so not quite a limp mode situation. I will attach the codes I found to this reply.
You mention clearing the fault in the window, I assume this is the panel display fault ‘engine system service required’. I am not sure how to do this but the car is currently 50 miles away from home at my friends garage.
Thanks for the replies.
ps photos will not upload to this reply so I will try and add to original post.
|