Quote:
Originally Posted by CNGBiFuel
Mine's a 1999 N/A V70.
I've played this game, mentioned in previous posts. Stock mine's a two-box system. I backed into a low-kerb. Damaged, I replaced with a single-box Walker effort. Noisier, and lasted 2 years. The Walker system is tinny junk.
In hindsight, the stock part lasts forever. I'd only broken the rear section. I would have been better finding a used item from a breaker, and cobbling that to fit.
Mine's a keeper. I had a custom-made twin-box system done in stainless. If you can justify it, at £450 it wasn't much more than the after-market offerings, and will outlast the car.
My notes:
End silencer for the 2-parted exhaust system.
Model 2000 Volvo introduced a 2-parted exhaust System to lower the exhaust noise of C70, S70 and V70 Petrol engines without Turbo. This Exhaust system has also been offered as a retrofit solution for the Volvo 850. This system consists of a main silencer (1019254) and an end silencer (1019255).
One part System is:
Volvo: 3531971, 8631006, 9142516
Bosal 290517 or 290-517
Walker 18275
EBERSPÄCHER 34.608.87
Two part System is:
Middle is:
Volvo 9470337 / 31372159
Walker 23047
Back is:
Volvo 9470338 / 31372156
Walker 23051
|
Found this interesting, my v70 has always sounded very loud so I'm wondering if it would be possible to fit just the rear silencer onto the one piece system...obviously a cut & joint job, don't suppose you know the inside diameter of the rear silencer?