View Single Post
Old Feb 2nd, 2024, 22:29   #1
Tomh14
New Member
 

Last Online: Mar 22nd, 2024 21:15
Join Date: Feb 2023
Location: Norfolk
Default 2008 Volvo V50 2.0D - clutch diagnostic help

Good evening all,

Would really appreciate some of your support - I'm trying to diagnose a fault that has occured on my 2008 volvo V50 2.0D clutch.

The pedal has lost resistance and now gets stuck to the floor and not surprisingly this sometimes prevents me from changing gear - If I pump the pedal hard and often enough the functionality is restored momentarily before it shortly fails again. The brake and clutch fluid reservoir had lost some fluid so I have refilled it and bled the system to no avail.

Now as I'm looking to diagnose the issue I felt certain it was an issue with the slave cylinder. This evening I found pools of brake/clutch fluid on top of the area that the clutch cables attach to shown in the photo attached. I did clean this up but I can assure you there were pools of clutch fluid in that area. This has thrown me.

What is the component that the clutch cables attach to in the photos and is it possible the fluid is leaking from around this?!

Any help would be greatly appreciated!!
Attached Images
File Type: jpg 4bf8012a-72d5-4483-96cb-3c9dbad4b4f9.jpg (205.4 KB, 14 views)
Tomh14 is offline   Reply With Quote