Quote:
Originally Posted by Clan
"pressostats" disappeared 25 years ago . but the engine ECU runs the compressor now and has a pressure sensor in the AC system so it needs gas pressure before it will turn the Compressor on.
You can test the compressor before gas is added by connecting a 12v feed to the wire going to the compressor , you will have put the 70cc of PAG oil in the compressor before fitting it so it will be ok to run for a few seconds whilst you test it .
|
Magic Thankyou once again. I’ll test it tomorrow to make sure it connects.
Edit. Yes oil was put into the compressor.