Quote:
Originally Posted by Bugjam1999
Hi,
A simple project actually, thanks to the way that volvo designed the system. If you look at the front of your washer fluid reservoir you’ll see two pumps clipped to the front of the bracket there, one for the front (windscreen and headlights) and one for the rear screen.
Each pump has two tubes, fluid in and fluid out, which are a simple push fit. Pull the tubes off the pump for the front, unclip it’s electrical connector and remove it from the car. Then put one of your other pumps in its place, zip tied to the bracket. Make connections to the tubes and electrical connector and that’s it.
Cheers
|
I have to admit I hadn’t looked. 😳
You’re right . I’ll try that.🤔