Hi All - the towbar and electrics are now
FREE to anyone who wants it, as it is still littering my garage floor (private only, no trades or onsellers).
Obviously at this price I can't ship it or deliver it, but collections are welcome and I promise to be friendly.
I will ask for a small token (bottle of nice whisky would grease the wheels) for me to open my garage door
Cheers (please WhatsApp me on +44 1484 688 194)
Quote:
Originally Posted by gneissdaewar
Hi All,
I've removed my detachable towbar from my V90 and plug-and-play CAN electrics. Mine was a D4 R-Design 2018 model. I believe it will fit most V90, and also the V90 CC and the S90 (but I'm not fully sure on the latter 2 cars).
If anyone is interested in buying it (it is an easy self install IMO) please do contact me for a chat.
They are about £600-£700 new (including fitting). I'm looking for a sensible offer but equally not looking for a fortune (so think £200, but open to offers).
Location is in Holmfirth, West Yorkshire.
Thanks, Nick
It was fitted in Aug 2018 and removed 3 years later - not used for towing trailers or caravans - just used for bike carrier.
The towbar is a detachable Witter with keys. You just remove the tube cap and insert the neck into the fitting and it self attaches.
The electrics just plug directly into the cars wiring harness - the plugs are in the back right corner of the boot in the v90 and the 13 pin cable then goes out a bung in the spare wheel well. The only wiring needed (if desired) is the fog light cutout on the car - you just find the relevant wire in the cars harness (cut), add connectors to each end, and insert the cutout connectors on the module into it (so the fog light now goes via the module).
I can provide lots more photos if anyone is interested. Close ups, photos of the de-install, etc. One photo attached to show all the bits.
Links to CAN electrics module is here: https://conwys.ch/pikto/87260814.pdf https://conwys.ch/en/katalog/?jsf=je...rsteller:Volvo Links to some fitting instructions for a Volvo foldable towbar which I found really helpful in getting the rear bumper on and off, and also in removing the various trim panels to get to the wiring inside the car.
https://accessories.volvocars.com/en...2018%20America |