Quote:
Originally Posted by RollingThunder
You may recall that I was also going to wire up the Low Coolant warning lamp. Unfortunately, my original cluster is missing the diodes/resistors that are needed to complete the circuit. So I'll wire the reservoir sensor up to a warning buzzer instead, along with a test button. Not the ideal 'factory fitted' option that I wanted, but i don't want to try soldering anything to a 28 year old plastic circuit board!
|
What you usually do is just add a wire to one of the three plugs (need to search which one) and connect that to the sender and a a bulb of course. I believe it is the middle connector position 9 which will be empty in your case.