Hi Swiss,
Thanks for this......... just had a look at the wiring diagram on line and it looks like both the brake lights and solenoid run off one circuit. In both the diagram for the Shift Lock and Brake lights it shows it as component 3/9 (Brake Light Contact) and both feed into C:34 and B:11 on the Central Electronic Module.
It then shows the CEM feeds to the Gear Selector Module, which then runs the solenoid. Could it be that the GSM is not recognising it is in park?
Should I take it into a garage and check if any faults are coming up?
Thanks again,
DJ
|