Quote:
Originally Posted by Baxlin
^^^^ Thanks for taking the trouble to comment, I really must drag it out from under the bench....
|
before you start check the condition of the welding wire spool
corrosion on the wire will defiantly lead to poor welding performance,
A tip to remember when changing the spool, dont forget to check the pinch roller size is correct for the gauge of wire used usually its either 0.6 or 0.8mm and is two sizes on one roller, two grooves 0.6 0.8, one on either end of the roller.
The most important thing to note is the new spool has ONE goal in life..
to get off the spool and throw coils of itself all over the floor while you are changing it.