Quote:
Originally Posted by Oilydad
I am confused.
Looking at the picture of your towbar, I see 4 bolts.... well I can see three of them actually, but assume the 4th is there.
If the towball bracket is welded to the main towbar, then what are they for? There would be no need for them?
But more to the point, I see that behind the right hand 2 bolts there is a mounting plate for a 7 pin socket. At some time, that must have been put there, and the only way to do that, as far as I can see, is to undo the bolts.
Are you SURE they don't undo? Basically IF they do, then you can simply mount another ball, electric socket and stab bracket for your newer stabiliser. I think you'll find that that whole ball unit detatches from the main towbar. I'd be very surprised if it didn't.
|
Hi Oily,
Thanks for the reply.
We seem to have got our wires a little crossed probably due to the way I have described it.
Before long I will be removing my towball bracket from the towbar to fit a 12S ( the grey one ) socket and I'll take, then post, some pictures of the fittings then.
A picture ( or two ), as they say, is worth a thousand words.
Thanks - Colin