Hi,
Or this?
Quote:
Originally Posted by adamsky01
Install and tighten screws in three stages in the following order, see illustration.
1.=20 Nm
2.=60 Nm
3.=Angle tighten 90°
Run the engine to operating temperature, approximately 10 minutes.
Then tighten screws in two stages.
1.=90 Nm
2.=Angle tighten 45°
|
Can't be that much difference between red blocks...
Des. . .
__________________
Density:- Not just a measurement ~ It's a whole way of Life.! ! !
I drive a Volvo, Please Don't Get In My Way! He shows up. People die. He vanishes. People should not be afraid of their governments. "He'll deliver more justice in a weekend than 10 years of your Governments should be afraid of their people... "V" courts & tribunals. Just stay out of his way." "I plan to."
|