[MikeSF]

I tested the injectors to see if they would open and deliver fuel using a 9V alkaline battery. I simply connected wires from the battery to each off the injectors momentarily and I could hear the injectors firing. I did this on each injector and then tried starting the car after reconnecting the injector wiring. Result – the car started and ran for a couple of seconds. It’s clear that no, or insufficient voltage is being supplied by the ECU. I’ve now contacted a company that will test and attempt repair of the ECU if necessary. They can also reprogram a second hand ECU to the same spec as the original, providing I can source one.