Quote:
Originally Posted by Bob Meadows
When reinstating the module & the electrical connections double check that the plug is seated correctly and that the metal securing fixing on top of the plug is pushed fully over securing this plug.
(Worth doing a wiring check & clean whilst doing the above)
When I first purchased my car this fitting had not been fully engaged although it worked OK.
Good Luck.
Bob.
|
Hi Mr Meadows thanks for your reply. Which 'metal securing fixing' are you referring to? I don't even have the plastic cover on my plug connector, just secured with a zip tie (see the photo). I'm sure the wiring plug was seated properly by pressing down on it as far as it would go.
The wiring check - do you mean probe each connector on the wiring plug with a multimeter or just a visual check for frays etc? And lastly, is it OK to spray contact cleaner into the wiring plug (with the multi-coloured leads going into it) and the ABS pump power plug?