Thread: 240 General: - H Reg 240, Project Thread
View Single Post
Old Mar 22nd, 2023, 10:23   #13
hreg240
Member
 

Last Online: Jan 22nd, 2024 10:59
Join Date: Mar 2023
Location: South East
Default

Quote:
Originally Posted by hreg240 View Post
Thank you all very much for the advice; Alan, your knowledge and tips are always very detailed and helpful!

I have made a note of the spark plugs and leads to buy, will add them to my basket.

The timing belt looks (from the paperwork) to have last been changed 20,000 miles ago - however, this was in 2013. Has anyone got a link (or part number) to the correct belt to purchase? I will also change the aux belts at the same time (again, a P/N or link would be most helpful).

I've always been hesitant to do the belts myself, but if it isn't too much of a fickle job, I'll give it a go this weekend. (I shall have a search on the forum for a step-by-step guide).

With regards to the main beam issue, I can hear the stepped relay (the silver one in the engine bay) making a clunking noise. With dipped beams on, clicking the mains on works, but I can't then switch them back off again. Hence my thought that it may be the stalk - again, something I shall take a look at when time permits.

I've had a quick look at the local factor's site. Am I correct in thinking this square toothed timing belt will fit?

(Car is 1990, H reg, model)

https://www.eurocarparts.com/p/dayco...belt-325660015

And for the drive belt (I have PAS but not A/C): https://www.eurocarparts.com/p/conti...belt-202770035

Last edited by hreg240; Mar 22nd, 2023 at 10:27.
hreg240 is offline   Reply With Quote
The Following User Says Thank You to hreg240 For This Useful Post: