Quote:
Originally Posted by Bob 1967
This is my mounting, my gearbox is a BW55 though.
I shortened the studs on the crossmember end.
Are your engine mounts okay?
My engine mounts went around the same time as the gearbox one.
And the complete unit shifted back, only a couple of cms, but it was enough.
As Alan says, the centre bearing could also be the culprit.
|
That is a good point about the engine mounts Bob, if one mount has failed that will put more stress on the other two.
They are pretty easy for the OP to change, this might help:
https://www.volvoforums.org.uk/showp...postcount=1347