Quote:
Originally Posted by gpl1968
I did mine with the brakes last year.
It's fairly simple although an impact gun is useful as one of the backplate nuts on each side was siezed needing a bit of brutality and a new nut.....
the angle bracket holding the ABS sensor needs drilling off and riveting onto the new plate.
The hub nut is single use so a new pair will be needed.
I think I have a spare 36mm socket if you need one, I'll be in Great Barrow on Saturday if it's of use.
As you can see in the pic mine had all the strength of a lace (paper) doilly.
|
I have a suitable socket, but thank you for the offer. There appears to be more metal on your old backing plate than mine!