Quote:
Originally Posted by baggy798
I would recommend either NGK BPR6ES or BP7ES. The 'R' stands for resistor but if you have got good HT leads you probably won't need them.
You can gap them if you wish, but the tool is an extra fiver. Having said that, ones that I have purchased have not been out by a vast margin. (we are talking 0.1-2mm - certainly nothing that would make ANY difference)
Don't grease the threads.
|
no dont grease them, use a touch of anti seize compound ,you dont need a tool to gap them use a set of feeler gauges