Volvo Owners Club Forum - View Single Post - S40: - cam sensor wire colour code/ not starting

interceptorv8 · Aug 14th, 2017, 07:07

Hi Guys
I am new to the scene. I purchased a non runner 2004 S40 2.5 turbo the head was off. I had the head re done,gaskets etc. The cam timing is right but the cam sensor plugs are gone.I only have the wires with pins. Colours : red/yellow +white /purple + brown white the other yellow/brown +black/white +yellow/black. I tested found 4.86v +5.0v and earth on one set, the other set no volts. I need to know which set goes on exhaust cam sensor and which is the intake cam sensor wires.as well as pin out colours. The car started for 20 sec then cut out. would not start again,it backfired twice
Thanks Steve

Aug 14th, 2017, 07:07	#1
interceptorv8 New Member Last Online: Oct 9th, 2019 13:08 Join Date: Aug 2017 Location: krugersdorp	cam sensor wire colour code/ not starting Hi Guys I am new to the scene. I purchased a non runner 2004 S40 2.5 turbo the head was off. I had the head re done,gaskets etc. The cam timing is right but the cam sensor plugs are gone.I only have the wires with pins. Colours : red/yellow +white /purple + brown white the other yellow/brown +black/white +yellow/black. I tested found 4.86v +5.0v and earth on one set, the other set no volts. I need to know which set goes on exhaust cam sensor and which is the intake cam sensor wires.as well as pin out colours. The car started for 20 sec then cut out. would not start again,it backfired twice Thanks Steve