Quote:
Originally Posted by cassell
Hi,
Yes, the pre-facelift ones are very different to the later type. Also, check if you have lost both the cover and the little kite-shaped connector piece that joins it to the water jet?
That connector piece is only available as part of a complete new washer jet and without it you cannot fit a new cover. If you are lucky and your connector is still hanging on, remove it and keep it safe until you get your replacement cover painted and ready.
As a further tip, gently fit a small cable tie around the locating lugs when you fit your cover, it will help to stop it flying off again!
Paul
|
It has a really good hold on the triangle and washer pump. These plastic covers are like most Volvo spares and very expensive for what they are. My opinion is that they get stolen by people who wont pay for new ones, rather than get lost. Therefore fixing a plastic tie could help but not against a thief.