Passenger door mirror not returning to preset position
Hi All, I hoping someone can help with an intermittent issue I am having with the passenger side door mirror. I have activated the convenience feature to angle the door mirror down when I engage reverse to avoid kerbing the wheels. When I then take up drive the mirror should return to the normal driving position. Of late (in the last two days) I have had 3 instances where the mirror does not return to the normal position, it just stays in the reverse position. Has anyone had and resolved this issued? Thanks.
|
2 Attachment(s)
Try this,
Attachment 135892 Or if that fails try this, Attachment 135893 Sorry, I am used to my Landrover Defender and its tool kit. |
Hi,
I've had what I thought was a similar problem, as often when I set off they are half down and I have to press the buttons to angle them normally. I actually have figured out that if I am reversing into a spot/our car port, I often go into park from reverse, and turn off the engine immediately. The mirrors are often slowly going back to their usual forward facing spot. I have to wait a few seconds now after reversing prior to switching off the engine. Could this be your issue too by chance? L |
Quote:
|
Quote:
|
Quote:
|
Quote:
|
My 2019 V90's nearside mirror would get very confused in the wet -- after a good shower or being washed. It'd go down, then start angling left and right as if it had lost its calibration and was trying to realign itself. Marshalls in MK had a look and reckoned it needed a new motor, which was fitted (under warranty, yay!) on Monday in about 45 minutes, and of course it's been lovely weather since then.
Is this on your 2020 car? I'm guessing that's still under warranty? Throw a bucket of water at it and see if it still misbehaves (or if that makes it misbehave) then get the dealer to have a butchers. Now if I could only find this clonking from somewhere inside the cabin. (No, it's not the nut holding the steering wheel, he just creaks and groans!) |
Quote:
Hope you find/resolve the issue with the clonking noise . |
Hello chaps,
After over a year fighting with Volvo dealers. I won and they had to replaced all driver wing mirror with wiring for new :) happy days so far no more issue with mirror position after reversing or after access to car or outside temperature sensor. There was the faulty wire inside the mirror that caused problem and also was interfering outside temperature sensor. Looks like this problem should be reported as recall. I have got loan car during my car stays with them and v90 reg 21 had exactly same problem:shocked:. |
All times are GMT +1. The time now is 19:03. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.