Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   S40 / V40 '96-'04 General (https://www.volvoforums.org.uk/forumdisplay.php?f=17)
-   -   2001 S40 - Key Shell (https://www.volvoforums.org.uk/showthread.php?t=339660)

Tom Sawyer Apr 27th, 2024 04:07

2001 S40 - Key Shell
 
1 Attachment(s)
re: 2001 S40 155,000 miles

Greetings,

The shell / case on my ignition key is falling apart after 25 years.

#1 Can I buy one of the new fancy switch blade + remote fob for my 2001 ?

#2 Are there after market shells - best price so far is $45 including shipping

Manythanks,

Tom

Bob Meadows Apr 27th, 2024 08:47

Any use?
https://www.ebay.co.uk/itm/391912737...Bk9SR8jRjujjYw
Bob.

Tom Sawyer Apr 29th, 2024 16:47

2001 S40 Key shell
 
Hey Bob,

Thanks for the suggestion. I'm in the USA and called the dealer - they said no to both the key shell and the key fob / shell you mentioned.

FWIW - my key does not have the straight line on the key, but more like a wavy line / zig zag.

Update: Blank Key = $45
Software and Programming ~ $155 = ~ $200
The fancy dealer in our area is charging $179 per hour :shocked::shocked:
They have 50+ employees at this location

Thanks,

Tom

Bob Meadows May 1st, 2024 09:01

Thanks for the reply:~
Typical ripoff prices from Volvo dealers for these keys.
-------------------------- " -----------------------

On my '97 V70 the keys are very similar- if you want to reinforce the worn part then it can be done: clean the area as best you can- obtain a short piece of copper tube (brake pipe sizes are good) that fits between the opening.. split the same tube lengthwise and roughen the inner bore.

Fix the above into place with J.B.Weld- and then close the tube as necessary.
The weld will initially slump a little so hold in place with tape whilst it starts to set- once it reaches the putty stage remove the tape & mould into shape.
(Allow it to fully cure)

You should end up with a much stronger key body.. Good Luck.
Bob.

Another option could be this? https://www.ebay.co.uk/itm/233875435302 If you can get a key blank as pictured-with a removable tab then the original chip could be removed from the key and exchanged etc.
This type of flat bladed key can be cut by some outlets, the key will require the chip to start the car.

Tom Sawyer May 1st, 2024 13:39

Hey Bob,

Many thanks for your attention to my issue.

Right now I am searching for a silicon slip-on cover or
some type of case. **

I am only driving this car about 3,000 miles per year, will keep it until one of us dies. I still have the other key.

The car really is in very good shape, considering I have added several thousand in new or replacement parts over the past 8 years.

I’ll update with my final solution. Best to you.

Tom

** Your fix is a great idea. At age 72 I’m just fat lazy and spoiled. Certain projects I am not very good at and have minimal tools / workspace. Apologies for the ramble.

Final: Money is not the issue, I’m just a skin-flint. My mother told me our family invented the copper wire = two cousins fighting over a penny 😉


All times are GMT +1. The time now is 03:14.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.