HIGH REVING IF PULLING AWAY QUICKLY
 

My little e reg 340gl seems to stick on high revs if i have to pull away quickly, of if i go at high speeds for a while [on motorways].

MY friend who is a mechanic doesn't have any idea why, so suggested asking you guys.

Any ideas?

x(

RE: HIGH REVING IF PULLING AWAY QUICKLY
 

I'm gonna preface this reply by saying I know nothing about CVT's.

There is a 'low gear hold' vacuum line and associated servo, I think. Is it possible that one of these lines is cracked or the servo is stuck?

I'm sure that someone more knowledgeable than me will reply to this.

RE: HIGH REVING IF PULLING AWAY QUICKLY
 

Hello,

Is it possible that the accelerator inner cable is catching on the outer sheath?

This sound a bit like a problem I had on my old 265 when the accelerator was 'floored'at any time the cable jammed - also after running at higher speeds for a time.

A dealership put the problem down to the cable jamming on the carpetting as it went through the bulkhead.