Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   S60 & V60 '11-'18 / XC60 '09-'17 General (https://www.volvoforums.org.uk/forumdisplay.php?f=187)
-   -   Inner cv boot split axle shaft (https://www.volvoforums.org.uk/showthread.php?t=317302)

myaquarium Jun 2nd, 2021 17:51

Inner cv boot split axle shaft
 
Hi there. After another expensive day at Volvo now informed the rear drivers side inner cv boot has split.
It’s an awd d5 2012 xc60.
Parts told me I need a full axle shaft as inner boot does not sell separately.
Cost near £400.
Part number is v36000931.
Any ideas who may sell these on the after market.
Have seen some on eBay but none matching that part number.
Thanks in advance.
To add I have found this. Manufacturer skf.
Any idea if they are any good
https://www.123spareparts.co.uk/car-...skf/p-13796204

Deck1ng Jun 2nd, 2021 18:42

Have a look on “AUTODOC”, I know they sell all sorts, they may just have what you are looking for.

myaquarium Jun 2nd, 2021 18:55

Quote:

Originally Posted by Deck1ng (Post 2742213)
Have a look on “AUTODOC”, I know they sell all sorts, they may just have what you are looking for.

Thanks.
I found some made by skf does anyone have any info on this manufacturer.

Kev0607 Jun 2nd, 2021 19:54

Quote:

Originally Posted by myaquarium (Post 2742216)
Thanks.
I found some made by skf does anyone have any info on this manufacturer.

A very good brand. I know they manufacture quality wheel bearings.

MikeGMT Jun 2nd, 2021 21:49

Quote:

Originally Posted by myaquarium (Post 2742216)
Thanks.
I found some made by skf does anyone have any info on this manufacturer.

Probably some of the best bearings and seals on the market. SKF is were Volvo AB were born in 1926, and was a subsidiary of SKF until 1935. Volvo is a trademarked name from SKF, Latin for 'I Roll' hence the bearing connection. The rest as they say is history.

Lonsdale Jun 3rd, 2021 00:57

If it's just split rubber

https://www.onlinecarparts.co.uk/oenumber/36000931.html

myaquarium Jul 31st, 2021 17:33

Looks like I will be returning parts to AUTODOC as no one will touch doing the trailing arms bushes. Special tool is needed.
I will now be letting Volvo do the work this week. Just waiting fir the dreaded call for two trailing arms fitted and rear drive shaft fitted.
The parts alone £500 any idea the labour charges if someone has had this done:confused_smile:

Deck1ng Jul 31st, 2021 18:07

Quote:

Originally Posted by myaquarium (Post 2758458)
Looks like I will be returning parts to AUTODOC as no one will touch doing the trailing arms bushes. Special tool is needed.
I will now be letting Volvo do the work this week. Just waiting fir the dreaded call for two trailing arms fitted and rear drive shaft fitted.
The parts alone £500 any idea the labour charges if someone has had this done:confused_smile:

Rubbish, yes a press is needed but not ultra special tool (as I was informed by Volvo). My local garage swapped both bushes and rear springs in less than 3 hours including delivery and collection and cost less than £400 incl labour but also doing MoT.

myaquarium Jul 31st, 2021 18:45

Quote:

Originally Posted by Deck1ng (Post 2758466)
Rubbish, yes a press is needed but not ultra special tool (as I was informed by Volvo). My local garage swapped both bushes and rear springs in less than 3 hours including delivery and collection and cost less than £400 incl labour but also doing MoT.

Don’t mind me asking where are you based. I’m in Merseyside and the local Volvo independent said no chance he could do it.

Kev0607 Jul 31st, 2021 19:54

Quote:

Originally Posted by myaquarium (Post 2758477)
Don’t mind me asking where are you based. I’m in Merseyside and the local Volvo independent said no chance he could do it.

He obviously isn’t very well equipped then.

Find another garage & stay away from the dealership because they’ll rip you off.


All times are GMT +1. The time now is 18:32.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.