Key fob
 

Hello guys,

I’ve just bought a 1996 440 2.0. How do I program the key fob to the car ? Can anyone help.

Many thanks in advance

fob
 

i did find some stuff- or have you sorted it?

fob
 

Keyfob Programming
Whilst not strictly a diagnostic function, the diagnostic unit is also used when programming new remotes into the alarm system. To do so, follow the steps below. The car will allow you to program up to 4 remotes.

1. Ignition OFF
2. Connect the diagnostic connector to hole 1
3. Lock and unlock the car using the existing (i.e. already recognised) remote
4. Switch Ignition ON
5. Press button on diagnostic unit 4 times
6. LED should come on
7. Press button 3 time, then 4 times, then 4 times again
8. Press unlock button on the first remote to be programmed
9. Repeat for each additional remote