PAS pump options
 

I was doing my usual monthly check on the 940 this morning and I've noticed that there is a bit of a wobble on the PAS pump shaft. Not just the pulley, its the shaft that looks like its moving so I suspect a bearing has failed. It is a bit noisier today too.

What replacement do you suggest? I've seen a TRW recon one, but I was wondering what other options there are? I don't want to fit a "good used" one in case that also fails in the near future.

Thanks as always

Classic Swede has this (I havent used so cant comment on quality etc)

https://www.classicswede.org/shop/po...=6063c4f214d95

Remeber to check whether the fluid return spigot goes straight out the back (8251726) or is angled up at 90° (8252306). There is quite a lot of choice on Aiutodoc for new non-OEM pumps but I’m not sure if they are clear on this compatibility detail.

Also, if your new one doesn’t come with a pulley attached you’ll have a whole world of pain transferring the pulley. You will need appropriate pullers and pushers dependent on whether the pump you’re working on has a 3/8” or 10mm thread. There’s some info on this and the correct tools (at a price) on the Skandix website.

Good luck!

Skandix has both available:
https://www.skandix.de/en/spare-part...ng-system/675/

Usually this one https://www.classicswede.org/shop/power-steering-pump-1

need to check the hose connection at the back of the pump.

Thanks everyone, I'll have a look at the pump tomorrow to see which one I need

Sent an email to your website Dai, thanks :)