PV throttle linkage and badge
 

I need the rod that sits vertically between the ball on the end of the throttle pedal assembly and the horizintal linkage. It needs to be 544, I've tried one off a 122S but it is too short.

I'm also after a bootlid Sport badge, the late one, not the earlier script. I know you can get repro ones, I have one but they're not nice. I'm after an original aluminium badge.

I also need a washer bottle basket for a PV

The car is a '65

peter re:basket, vertical
 

hey peter i have a original alloy type basket which i took off one of my red sport 64 its not the wire type its the thicker band type also i have the vertcal spindal.....johnnypv see yer

Superb. Have you got the joiner for the bonnet trim? I have 4; 3 have the stud broken off and the one with a stud is bent......

I've found these guys really worthwhile for helping to keep my PV on the road.

http://www.vp-autoparts.com/

I know VP, but they, and all the other suspects like CVI only have repro badges.

Yours for postage if you're stuck.

http://i203.photobucket.com/albums/a...6pscs-vert.jpg