12v but bulb and led won’t work!!!
Ok so I’m utterly stumped here.
Parking light on passenger side is out so swapped the little bulb, no joy, Found a thread saying it’s in series with the led light. Bought a replacement unit, still neither light up…… Thought pattern was there must be no power but I’m getting 10v on one side and 0.9v on the other. What I don’t get is the 0.9v is the working side! So I’m guessing my meter had a bad connection When I turn car on the non working side goes up to 12v So the side that shows the higher voltage is not working. I’ve never seen this before and can’t see how this is possible. ( I’ve swapped bulbs between sides to see if new one is faulty no luck It can’t be an issues in the ecu can it??? Surely not Feeling like I’m being utterly dumb here |
Update,
When I disconnect the bulb and led both connections have 10v When the bulb is connected the led goes to zero When the led is connected and the bulb is out the bulb volt goes to 1 v Even more confused I’ll try it with engine running |
With the engine running I have 1v at the light and zero at the LEd!
Found same side rear fog out so swapped it with the other side but that didn’t fix it |
Well if anyone else has this stupid issue, it’s fixed it’s self by disconnecting the battery while the lights were on and re connecting in less than a second.
|
Quote:
|
All times are GMT +1. The time now is 12:26. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.