Rear bump stop renewal
1 Attachment(s)
After a few days in the P2 section with no comments, I hope you don't object to me cross posting here an AWD car issue...
My V70 AWD is splitting the rear bump rubbers ( item 19 on the attached drawing) Anyone ever replaced these items. Vida shows the attached drawing under the spares tab, but under the replacement tab item 19 is shown as a bolt through item, which it is not. I suspect they will be a little similar to replacing a brake piston seal, in that you have to go round and round pushing it a little further down until its seated into a retaining groove. Knowledge of this fact would be appreciated. Cheers Bob |
If I’ve been able to link it, have a look at this thread.
https://www.volvoforums.org.uk/index.php It’s concerning my daughter’s XC70 and the bump stops (helper springs) are mounted on the upper part of the suspension, but the principle may be the same. I haven’t yet tried to fit the new ones and the car has just been MOT’d and they weren’t mentioned at all. https://www.volvoforums.org.uk/showthread.php?t=303187 Seems to have worked this time but not sure how. |
Thanks Ian, a lad came back to me in the P2 section telling me they were a "push fit" and locate with a lip in a groove.
I have not got around to doing job yet - more pressing this keep cropping up. Cheers Bob |
All times are GMT +1. The time now is 12:20. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.