Towbar electrics
I need to add a grey 12s socket to my tow bar as I only have the black one. Iv been advised i need a split charge relay but it's something that doesnt come with a 12s socket.
Is this something that is already part of the cars wiring? I have an angle bracket which is easy enough to source and most 12s sockets come pre wired |
Quote:
or get a 13 pin plug to 2 x 7 pin sockets adapter lead ... https://accessories.volvocars.com/en...CC-480744/2008 No3 I would think |
Quote:
Is it to do with the electrics available on the car? |
Quote:
its just neater with one plug 👍 |
The standardization to 13 pin was to overcome the problem of the 12n and 12s plugs and sockets melting due to poor contacts and subsequent heat bulld up.
|
So would changing the existing 12n socket for a 13 pin socket be an easier process?
Would I need anything else? Is there any changes to be done on vida? |
You should just be able to change the wiring over with no need to use vida.
You need to make sure the socket is aligned properly to ensure easy engagement. There is a little “gizmo” that also doubles as a cover for the plug when it is not plug into the car to do this. |
Quote:
|
There should be as the Volvo system just plugs in.
Look at Volvo accessories for your car and read the fitting instructions for the towbar fitting which will include the wiring. |
Quote:
|
All times are GMT +1. The time now is 15:37. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.