XC70 D5 185 injectors fitting
Hi.
Sadly the source of the missfire on injectors 1 to 4 is definitely Injectors after new terminal connectors and Cloned ECU didn't help. Found some second hand injectors quite reasonably priced , question ,Can I reuse the old injector clamps and bolts? Will get new copper washers. I know injectors need coding , would it run ok without coding? I would imagine my local volvo specialist would want 100 quid to code all 4 Thanks |
Can't comment on the clamps & bolts, but the engine should run. Maybe not very well, but should be enough to nurse it to a garage.
|
When I did the injectors on my girlfriends D5 V70 58 plate so I think it's the 160 bhp. I replaced 3 out of 5 with the exact part numbers from a breakers and they work perfectly with no coding. New copper washes/seals are essential I managed to salvage the best of the clamps and bolts I had form the original and replacements, but if any look slightly flattened I would replace them. Also lock tight the threads on the bolts.
|
Quote:
volvo do fitting kits , you will need one for each injector , you are also supposed to replace the high pressure pipes when you remove them . |
Quote:
Thanks. My Injectors part 30750283 have 7 digit code , some replacement same part numbers have 8 digit code. Does it have to be 7 digit code inorder to code replacement ones in? What are the chances of it running without coding |
Also whats the torque setting for the injector clamp bolts on D5 185BHP?
|
Quote:
|
All times are GMT +1. The time now is 04:36. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.