Starter problem
Hi, when the engine is cold the Bendix doesn't always engage the flywheel to turn the engine over for two or three attempts. OK when warm. I suspect that some lubrication is required after I have cleaned the shaft, what should I use,copper-ease, graphite etc?
Advice welcome. |
A very "light oiling" or graphite powder should do it- I would avoid any form of grease as it can pick up dust/dirt.
Bob. |
1 Attachment(s)
Can' find graphite powder locally so a pencil will have to be offered up in sacrifice!
That should do the trick! |
Got my last one from https://uk.rs-online.com/web/p/lubricants/7031086/
Seems good value with delivery included. Regards Bob. |
As luck would have it I found some graphite oil in the back of the garage.That and some of my graphite powder should do the job. If not its back to the head scratching.
Job done,all A OK |
All times are GMT +1. The time now is 03:36. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.