Volvo Owners Club Forum

Volvo Owners Club Forum (https://www.volvoforums.org.uk/index.php)
-   850/x70 S1 Sales (https://www.volvoforums.org.uk/forumdisplay.php?f=158)
-   -   Genuine Volvo key fob’s (https://www.volvoforums.org.uk/showthread.php?t=321177)

vol Nov 3rd, 2021 19:44

Genuine Volvo key fob’s
 
3 Attachment(s)
For sale 850/S90/V90/96-98

brand new with batteries no longer needed €130 the pair

or willing to split €70 each

located in Dublin/Ireland

Cheers Vol.

RollingThunder Nov 5th, 2021 07:41

Hi Vol,

Do you have the matching alarm relay? Not necessarily to sell, but I'd like to know the part number of the alarm relay before saying I'll take one of the fobs (or maybe both). I have a few alarm relays now but can't match them to any fobs, so if your fobs correspond to one of my relays... :)

Thanks

vol Nov 5th, 2021 10:39

Hi good morning sorry I don’t have the alarm relay, the car I got the fob’s for is gone now I have moved up to the P80 so just wanted to pass the fob’s on as I know they are getting hard to find..I do believe that they are very easy to program with the 850/V90..

Cheers Vol.

4x4 Nov 5th, 2021 12:16

As far as I'm aware the fobs with "Lock Panic" and "Unlock" script on the buttons were not for the UK cars

vol Nov 8th, 2021 22:57

Provided your original key fob looks just like this one it will work just fine. the older models 94-95 used a square type fob and they are not interchangeable.

vol Nov 8th, 2021 22:59

1 Attachment(s)
older models 94-95 used a square type fob

Cheers Vol.

Timmilne Nov 10th, 2021 10:47

Are these still available?

Is it a question of re-programming them to sensor in the car (pressing buttons etc)?

vol Nov 10th, 2021 13:41

Hello Timmilne

still available indeed.. so as for programming them very easy
just follow these simple steps

To program the fob into the car you should, with all doors and bonnet closed, do as follows:

Step 1. During a max of 10 seconds period, Turn the ignition on and off 5 times in a row

Step 2. In the fifth time leave the ignition on. If you wait a couple of seconds and look at the alarm led it should be flashing. If not, start from the beginning (step 1)

Step 3. With the led flashing, push a button on the remote until the flashing slows. This means that the signal from the fob was received and programmed into the car.

Repeat the step 3 for each of the remotes

Step 4. When the flashing led stops, turn the ignition off and remove the key
now check if your remote is working

hope this helps

Cheers Vol.

vol Nov 12th, 2021 18:14

Sold. Thanks for all the interest.


All times are GMT +1. The time now is 06:19.

Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.